Hiring overseas tradespeople? You can't watch them work, so make them show you before the offer

Hiring overseas tradespeople means making an offer to someone whose welds, wiring or brickwork you have never seen. If the skills are weaker than the CV, you may only find out after months of visa paperwork, relocation and a new start who cannot work without close supervision. That is a costly hire for a small business and a hard landing for the worker.
Below you will learn how to see a tradesperson's work from another country: what to ask them to show you, how to run a practical check over video, which questions expose gaps in local standards, and how to plan the first weeks so small gaps do not become big ones.
Why overseas trade experience is hard to judge from a CV
A CV that says "eight years as a plumber" tells you very little on its own. Trades are learned on the job, and what eight years means depends on the country, the employer and the kind of work.
The same title can cover very different work
An electrician in one country may have spent years on domestic rewiring, while another with the same title has worked mainly on industrial control panels. A carpenter may be a framer, a cabinet maker or a formwork hand. Before you judge the level, find out what the person actually did every day.
Standards, tools and materials change across borders
Building codes, wiring rules, pipe sizes, measurement systems and common brands differ. A skilled worker may simply not have used the materials or methods common on Australian sites. That is not a red flag; it is a training need you should know about before the offer, not after.
Paperwork is uneven
In many countries trade workers have no formal certificate, small employers close down and records are kept on paper. A missing document is a question to ask, not proof that the experience is false. For the paper side, the article on checks that show whether a tradesperson's experience is real covers records, referees and dates in detail.
Ask them to show you the work, not tell you about it
The fastest way to close the distance is evidence you can look at yourself. Ask every shortlisted candidate for the same set, so you can compare like with like.
- Photos of finished jobs, with a short note on each: what the job was, what they did themselves and what the team did.
- Short videos of work in progress, filmed on a phone: a joint being welded, a switchboard being tested, a frame being set out. Hands and work in view, not a narrated slideshow.
- A walk-through of their tools, naming each one and what they use it for. Gaps in common tools often show where the experience is thin.
- Drawings or plans they have worked from, with any client details covered.
Be clear that photos must be of their own work and that you will ask about each one. Candidates who did the work can usually talk about it easily: the problem on the day, why they chose a method, what went wrong. The post on what tradies should film in a 60-second work video is a useful link to send candidates who are unsure what to record.
How to run a practical check over video
A live video call can show you far more than a phone interview. Plan it like a short trade test, and give every candidate the same tasks.
- Send the brief two days ahead. Tell the candidate what they will be asked to do, what tools or materials to have ready and that the call will run about 45 minutes.
- Start with a quick tour. Ask them to show the workshop or site they are in and the tools in front of them, so you know what they have to work with.
- Set one small, real task. For a welder, prepare and run a short bead on scrap plate. For an electrician, explain and demonstrate testing a circuit with their meter. For a carpenter, mark out and cut a simple joint. Keep it to something they can finish on camera.
- Ask them to talk as they work. Why that setting, that sequence, that safety step? The explanation tells you as much as the result.
- Give them a drawing to read. Share a simple plan on screen and ask what they would do first, what they would check and what questions they would ask the supervisor.
- Finish with a problem. Describe a common fault or site situation and ask how they would handle it.
- Score straight after the call against a short sheet you wrote before the first interview, so every candidate is judged on the same points.
Keep in mind that a phone camera, poor light or a slow connection can make good work look rough. Judge the method and the explanation, and ask for a recorded video afterwards if the call was difficult.
What to ask about local standards
You are not looking for someone who already knows every Australian rule. You are looking for someone who knows the trade well and understands that rules differ.
Examples for any trade
- "Which standards or codes did you work to at home, and who checked your work?"
- "Tell me about a job that failed an inspection. What happened and what did you change?"
- "What do you expect to be different about working on sites here?"
- "Which tools or materials in the job ad have you not used yet?"
What a good answer sounds like
A strong candidate names specific rules or methods from their own country and admits where they will need to learn. A weak answer claims everything will be the same, or stays vague about who checked the work.
For referee calls, the article on reference check questions that actually test the work gives questions you can ask a supervisor overseas.
Licences, skills assessments and work rights: what you still have to check
Seeing the work is one part. Several formal points sit outside any interview, and they decide whether the person can legally start.
| Check | Why it matters | Where to look |
|---|---|---|
| Australian trade licence | Some trades, such as electrical and plumbing work, need a state or territory licence before the person can work unsupervised | The licensing regulator in the state where they will work |
| Skills assessment | Many skilled visa pathways for trades need an assessment by the relevant assessing authority | Trades Recognition Australia |
| Work rights | You must confirm the person is allowed to work for you before they start | Home Affairs VEVO |
A licence gap does not have to end the process, but it changes the start date and what the person can do in the first months. Ask early, and build the timeline around it. Visa questions belong with a registered migration agent or the official Home Affairs pages.
Using a verified profile to save time
When candidates send a Talent Tabloid profile link, you can see their work history, qualifications and referee names in one place before the first call. A role or qualification only carries a verified badge after the person the candidate nominated confirmed it or the Talent Tabloid team reviewed supporting documents. Candidates can also attach work videos, photos and portfolio links to specific skills, which suits trades, although that evidence is not certified and is yours to judge.
If you are hiring for a trade, the employer dashboard's Search by Skill lets you describe the role in plain English and choose the work country. You can also look up a candidate the applicant names on People Search. To try it, create an employer account; the employer page explains how contact unlocks and the Base Plan work. Talent Tabloid does not check visas, run police checks or carry out skills assessments, so the formal checks above still apply.
Plan the first weeks before the offer
Even the best remote check leaves some unknowns. A clear plan for the first weeks turns them into training rather than surprises.
- Pair the new worker with an experienced supervisor for their first jobs.
- List the local methods, materials and paperwork they need to learn, from your interview notes.
- Book any induction, site safety card or licence step before they arrive where you can.
- Agree check-in points with them, such as the end of the first week and the end of the first month.
Any trial shifts must follow the workplace rules. Read the Fair Work Ombudsman's guidance on unpaid trials before asking anyone to work without pay.
Frequently asked questions
Can I test an overseas tradesperson's skills without flying them in?
Yes, to a point. Photos, work videos and a structured practical check over video show method and knowledge well, but final judgement of speed and finish often comes in the first weeks on site.
What if the candidate has no trade certificate?
Many skilled trade workers learned on the job. Ask for evidence of the work, referees who supervised them and their plan for any assessment or licence the role needs here.
Should every candidate get the same video tasks?
Yes. The same brief and the same score sheet make the comparison fair and help you explain your decision later.
Who checks whether the person can work in Australia?
The employer does. Use the Home Affairs VEVO service to confirm work rights before the person starts.


